Aluminium Handrails

Just put out your hand, we’ll be there.

close

Product Overview

Provide effective industrial protection with our specialty aluminium handrails and steel railing systems.

Fully compliant with building regulations and H&S code, our handrail systems are manufactured from industrial-strength aluminium, with fixings comprising of T316 Stainless steel, designed to withstand extreme conditions.

Rapid installation times with most handrails built on site

Suits many applications, including guardrail isolation, industrial handrails, walkways, handrails for disabled access and stairs or full roof edge protection guard rails.

Benefits

  • Very versatile system, limited or no pre-fabrication needed
  • High tensile marine grade aluminium used throughout
  • Option of MonkeyToe fixing details
  • Modular for simple and fast installation
  • Versatile 360° swivel bends used.
Level walkway with handrail
Level walkway with handrail
Level walkway with handrail
Safety handrail On platform
Compliant handrail system
Skywalk with handrail
Handrail installation
Flexi handrail Joiner
Double sided handrail
Ladder exit handrail to meet compliance
Handrail bracing
Bunnings handrail to gutter guard
Double sided safety rail
Roof mounted handrails
Wall/Parapet mounted
Level walkway with handrail
Safety handrail On platform
Compliant handrail system
Skywalk with handrail
Handrail installation
Flexi handrail Joiner
Double sided handrail
Ladder exit handrail to meet compliance
Handrail bracing
Bunnings handrail to gutter guard
Double sided safety rail
Roof mounted handrails
Wall/Parapet mounted
HANDRAILS COMPLIANCE
Product Description Image
Walkway mounted These are mounted directly from the MonkeyToe Walkway supports for simple, fast and effective installation. Handrails can be retrofitted to existing MonkeyToe® Walkway. Stanchions are spaced at 1800mm centres with the top, mid and kick rail included as required.
Parapet or wall mounted These can be base mounted or side mounted and come in a variety of different designs or configurations. This system is very fast to install and limited pre-site measuring is required. Transitions are simply achieved by universal ‘ball joint’ bends. The system is Tek screwed together to form a compliant handrail system.
Roof mounted This can be fixed to the roof using either the MonkeyToe fixing method (recommended) or the Bulbtite rivet fixings. These can be used where wall mounted handrail is not an option or where a handrail is required from a ladder access point.
Roof edge protection This system is becoming increasingly popular and economical. A full roof edge system removes the need for safety harness requirements and removes the requirement for continual ‘safety at height’ training. The full roof edge protection system allows for easy access to gutter cleaning as the system is normally mounted to the wall structure and sits outside the gutter line, then is angled back in to form a safe but ‘styled’ look to the roof line.
HANDRAILS COMPLIANCE

Designed in accordance with NZS/AS 1657:1992. ‘Guidelines for the Prevention of Falls’. Where an employee is required to work closer than 2m to the edge of any roof or from where a fall is possible, fall protection or edge protection must be provided.

As a minimum standard on roofs from which a person may fall 3m or more:

  • On completed roofs that provide a secure footing, edge protection, fall protection or bump rails 2m from the edge shall be used
  • On roofs that do not provide secure footing, or are steeper than 30o, fall protection, work positioning systems or permanently installed access and platforms shall be used