The MonkeyToe fixings and extrusions make up the extremely successful products that have seen us become market leaders in the arena of roof protection and roof mounting.
The mounting clips have been designed in conjunction with roofing consultants and manufacturers in NZ who provided strict parameters on the essential requirements for rooftop mounting that would not void their warranties.
All mounting clips, extrusions and fixings are designed to comply with the ‘dissimilar metals’ standards while also maintaining strength and ability to withstand the extreme external weathering that we are exposed to in New Zealand. The mounting clips and extrusions produce a very versatile system that can be mounted in many different configurations and applications for the building industry
The MonkeyToe Roof fixing method eliminates roof leakages… extending the longevity of your building and assets. All loads are transferred directly to the building sub-structure through our specialised fixing method. We have fixing methods for both TOP FIX and HIDDEN FIX roofing profiles. MonkeyToe Top Fixing roofing clips have a specially fabricated jack stud which is threaded into the roofing clip then sits on the purlin below. The jack stud is then tek screwed onto the purlin and the Monkey Toe clip screws down the outside of the stud until it is sealed onto the roofing profile. Using this unique Monkey Toe fixing, all loads are transferred to the building structure – not the roofing product.
MonkeyToe Hidden Fixing roofing clips (e.g. for Dimond 400 & Dimond 630 type roof profiles) We have a “Master Clamp’ which is used on all hidden fixing profiles, along with an insert which changes depending on the profile type/shape. The ‘Master Clamp’ along with the insert is placed over the profile ridge and the ‘Master Clamp’ side bolt is tightened to clamp it firmly over the profile. This means there’s is no penetrations at all – therefore no leakages.
|RC01.1 Membrane Roof fixing clip||Membrane Roof Fixing Clip. (for a Membrane roof profile) to suit PM03 or similar Extrusion (Commonly used on MonkeyToe Walkway and large Platforms)|
|RC01.2 Standard fixing clip (for a top fix roof profile)||Standard Fixing Clip. (for a Top Fix roof profile)|
|RC02.1 Membrane roof fixing clip||Membrane Roof Fixing Clip. (for a Membrane roof profile)to suit PM03 or similar Extrusion (Commonly used on MonkeyToe Walkway and large Platforms)|
|RC02.2 Standard fixing clip (for a top fix roofing profile)||Standard Fixing Clip. (for a Top Fix roof profile) to suit PM01 Channel (Commonly used on MonkeyToe Condenser Mounts)|
|PM01 - 45mm Diameter extrusion||Can be purchased per metre or in full lengths of 5800mm (This is commonly used on MonkeyToe Condenser Mounts|
|PM02 - 53mm X 50mm extrusion||Can be purchased per metre or in full lengths of 5800mm|
|PM03 - 53mm X 90mm extrusion||Can be purchased per metre or in full lengths of 5800mm|
|PM06 - 53mm X 75mm extrusion||Can be purchased per metre or in full lengths of 5800mm|
|Duct support||The MonkeyToe Duct Supports are custom built to suit your requirements, please use the Enquiry Form below or email@example.com your design requirements.|
|Pipe and cable support||The MonkeyToe Pipe & Cable Supports are custom built to suit your requirements, please use the Enquiry Form below or firstname.lastname@example.org your design requirements|
Download all of the above files in one zipped folder