ANCHOR POINTS
Kattsafe AP118 Raised Concrete Anchor Point
Raised Concrete Mount Anchor
The AP118 raised concrete mount anchor is suitable for fall arrest and rope access use on ballast/aggregate roofs.
Key product features:
-
Fall arrest/rope access use
-
15kN rated (fall arrest) / 12kN rated (rope access)
-
Can provide rope access when used in pairs
-
Weight range: 0.6 to 0.9kg
COMPLIANCE
DOWNLOADS
Key product features
-
Fall arrest/rope access use
-
15kN rated (fall arrest) / 12kN rated (rope access)
-
Can provide rope access when used in pairs
-
Weight range: 0.6 to 0.9kg
Installation details
Installation must be carried out by an accredited Kattsafe Fall Protection Certified Technician, and in accordance with the manufacturer’s installation instructions. It can be installed during roof construction or as a retrofit from the top of the roof surface.
Product warranty
10 Years from the date of purchase, subject to correct installation. Use and maintenance to be in accordance with the manufacturer’s specifications and recommendations. (This excludes wearing parts).
Terms & Conditions:
All warranty claims must be made in writing within 14 days of the appearance of the defect.
Testing & Approvals
Testing and performance based on AS/NZS 1891.4:2009
- Dynamic load test 15kN
- Static load test – 15kN
-
AP118.200 not suitable for rope access use.
The Whole Height Solution.
From The Team You Already Trust.
Thinking of your next project? Let's chat.
COMPLIANCE
-
The AP118 raised concrete mount anchor is designed and manufactured in accordance with requirements of AS/NZS 1891.4:2009, AS/NZS ISO 22846 and AS/NZS 5532:2013
DOWNLOADS
Specification Sheets
Kattsafe AP118 Raised Concrete Mount Anchor Specification Sheet PDF
Technical Drawings
Kattsafe AP118 Raised Concrete Mount Technical Drawing
REVIT/BIM
Kattsafe AP118 Concrete Mount – Torque Indicator
Kattsafe AP118 Concrete Mount – Raised
Kattsafe Anchor Point – Revit 2025 – Virtual Showroom